10/100 Ports - Cisco 2960-S Hardware Installation Manual
Catalyst 2960-s series
Hide thumbs
Also See for 2960-S:
- Started manual (31 pages) ,
- Software configuration manual (980 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Front Panel
•
On a per-port basis, you control whether or not a port automatically provides power when an IP phone
or an access point is connected.
The 10/100/1000 PoE ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is
328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e, or
Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or
Category 4 UTP cable.
Cisco intelligent power management capabilities include enhanced power negotiation, power
reservation, and per-port power policing. For information about configuring and monitoring PoE ports,
see the switch software configuration guide on Cisco.com.
For information about port connections and port specifications, see the
Port Connections" section on page 2-24
The output of the PoE circuit has been evaluated as a Limited Power Source (LPS) per IEC 60950-1.
Note
10/100 Ports
The 10/100 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is
328 feet (100 meters). The 100BASE-TX traffic requires Category 5, Category 5e, or Category 6
unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or
Category 4 UTP cable.
For information about port connections and port specifications, see the
Connections" section on page 2-26
10/100/1000 Ports
The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is
328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e, or
Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or
Category 4 UTP cable.
For information about port connections and port specifications, see the
Connections" section on page 2-26
Catalyst 2960-S Switch Hardware Installation Guide
1-6
Total power budget can be allocated among the ports
and
Appendix B, "Connector and Cable Specifications."
and
Appendix B, "Connector and Cable Specifications."
and
Appendix B, "Connector and Cable Specifications."
Chapter 1
Product Overview
"10/100 and 10/100/1000 PoE+
"10/100 and 10/100/1000 Port
"10/100 and 10/100/1000 Port
OL-19732-04
- Quick Links:
- Switch Models
- Front Panel
- Management Ports
Hide quick links:
Advertisement
Table of Contents
