Solid Cooking Fats; Timer; After Frying - Silvercrest SKF 2300 A1 User Manual
Cool-zone deep fat fryer
Hide thumbs
Also See for SKF 2300 A1:
- Operation and safety notes (91 pages) ,
- Operating instructions manual (63 pages) ,
- Operating instructions manual (14 pages)
Table of Contents
Advertisement
Note:
The frying process can be overseen through the
viewing window 1 in the appliance lid.
Solid Cooking Fats
To avoid a spraying of the fat and that the appliance
becomes too hot, please take the following precau-
tions when using solid frying fat:
• When replacing old fat with fresh, first melt the
fresh blocks of fat slowly, under low heat, in a
separate pan. Then carefully pour the molten fat
into the deep fryer. When this has been done,
insert the power plug into a socket and switch
the deep fryer on.
• After use, store the deep fryer with the solidified
fat at room temperatures.
Should the fat become too cold, it could cause
splattering on remelting! To avoid this, poke a few
holes into the solidified fat with a wooden or plastic
spatula. Ensure that no damage is caused to the
heating element.
• To melt the fat, switch the appliance on with the
On/Off switch 0 and then adjust the temperature
regulator 8 to 130˚C. The control lamp 9 starts
to glow.
• Wait until all of the fat has melted. First then set
the desired frying temperature.
Timer
You can programme in a countdown of up to 60 mi-
nutes with the timer q:
• Press the button "
• Press the buttons "+" and "-" to set the desired
time in minutes.
• Press on the button "
of the time. The programmed time will blink twice
to indicate that the countdown of the time has
begun.
2 signal tones sound on completion of the countdown.
The short-period timer q switches itself off automati-
cally.
Note:
On expiry of the countdown the heating element 5
is NOT switched off! Therefore pay heed to the signal
tone from the short-period timer q, so as to avoid
spoiling the food being fried.
Note:
When the battery is discharged, exchange it. Always
use a replacement battery of the same type. Pay
heed to the correct polarity when inserting it.
After Frying
• When the food is ready, pull the handle upwards
until the handle locking button w engages.
• Leave the frying basket 3 in this position to drip
off.
• Press the On/Off switch 0. The deep fryer is
now switched off. Remove the power plug from
the wall socket.
• When the food has dripped off, open the ap-
pliance lid by pressing the lid release button 6.
- 6 -
" on the timer to switch it on.
" to start the countdown
Hide quick links:
Advertisement
Table of Contents
