Contents Page Safety instructions...................... Protection of the environment/Hints and tips............Disposal information ....................Introducing your washing machine ................ 1 - Installation instructions Transportation protection devices ................Moving the washing machine .................. Connections - Water supply- ..................Connections - Water drainage ..................
Page 3
Your washing machine is distinguished by its economical consumption of energy, water and detergent. Every washing machine that leaves our factory is carefully checked to ensure that it is functioning properly and is free of defects. If there are any questions - especially in regards to installing and connecting your washing machine - please do not hesitate to contact our Customer Service department.
The extended washing time of costs. this 60°C programme achieves a cleaning To use your washing machine in an efficient result comparable to that of the 90°C and environmentally friendly manner: programme, but uses considerably less energy.
Introducing your washing machine Control panel Lid handle (remains locked during Unlocking of detergent the programme) dispenser Removable detergent dispenser Button for opening the drum lids Locking lever (depending upon the model) Properly close drum lids! click! Water drainage hose...
Page 6
Removing the transportation protection devices Before the machine is used for the first time, all transportation protection devices from the back of the appliance must be removed and stored for any later transport (i.e., relocation)! 1 Remove the machine from the transport Check to see that both plastic inserts on ( Figure 1 ).
Removing the transportation protection devices ➀ 5 Remove the protection devices Remove hose retainers and cover ➁ (Figure 3) . the holes with the caps provided (found To do this: in the accessories package) (Figure 4) . - Lift the lid on the machine - Remove wedge - Remove wedge - Release the drum doors, locked in the...
Connections Cold water supply Figure 6 Connect water-inlet hose (Figure 6) - Minimum water pressure: 0.1 MPa or 1 bar - Maximum water pressure: 1 MPa or 10 bar 3/4” Drain Figure 7.1 Mount drain hose with the supplied elbow, connect to a vented drain (Figure 7.1/7.2) .
Frozen hoses may tear or burst. Do not install the washing machine in an area where there is a risk of freezing or outdoors. Do not lift the washing machine by any projecting parts (e.g., lid handle). The washing machine may be damaged. Adjustable feet:...
International Laundry Care Symbols In order to assist you in taking care of your textiles, these contain a label with the necessary information. The information is given by the following symbols : WASHING (Washtub) Special Normal Normal Gentle Normal Gentle Gentle Gentle Do not...
To avoid the danger of a fire or explosion: ( * ) When using the solutions mentioned above, rinse the articles thoroughly before putting them into the washing machine. - Strictly follow the manufacturer's instructions when using common stain removers.
Foreign objects (e.g. coins, paperclips, - Small laundry items, e.g. socks or needles, nails) may damage laundry items handkerchiefs or washing machine components (the drum - Underwired bras (underwires may for example). become detached during washing and • Empty the pockets of the laundry items.
Foreign objects in the washing drum Water and energy consumption by the may damage laundry. Check the drum washing machine is automatically reduced for foreign objects before putting in the for smaller loads. laundry. • Close drum lid.
Setting the programme Display panel for programme Starting time button Programme selector length and Delayed Start Spin speed selector Additional function Start/Pause button buttons Display panel and the position of Selecting the programme: the spin speed selector Programme length, e.g. •Select the desired programme using the programme selector.
Selecting the programme Basic programme Wool cold, 30°, 40°C Select the desired programme - also see the For hand- and machine-washable wool or Programme Chart. wool-rich textiles, e.g. cashmere, mohair or For the maximum spin speed of the angora. programme, see the chart on the next page. Silk cold Cottons + Linens...
Additional function buttons PREWASH RINSE STOP (No Final Spin) (depending upon model) For heavily soiled, hard-wearing textiles, For delicate textiles and curtains. The e.g. from cotton or linen. laundry remains in the final rinse water. The Prewash washing temperature is The laundry goes through a short 30°C.
Delayed Start By pressing the pushbutton multiple times, start of the programme can be delayed from 1 to 19 hours. The selection is confirmed after a few seconds. To activate the delayed starting, press the ”Start“ button. The course of the Delayed Start is displayed every hour from 19 hours to 1 hour, and then every minute from 59 minutes to 1 minute.
Changing the programme (continued) Changing the programme: - during the preselection of starting time: During the preselection of the starting time, All modifications are possible before the all programme changes are allowed. ”Start“ button has been pressed. The preselection of starting time may be - immediately after the start of the changed at any time, e.g.
Safety features Lid opening safeguards: Spin safeguards: After the programme starts, the appliance lid The washing machine is equipped with is locked. a safety feature that can reduce the spin speed if imbalanced loading occurs. After the programme ends or during ”Rinse In this case, the laundry may be insufficiently Stop“, the lid is unlocked.
Completely disconnect the washing machine this purpose: from the mains. - To remove the detergent dispenser, Never clean the washing machine with a jet squeeze both pressure points of water. simultaneously (Figure 10) . The dispenser then detaches itself from the compartment Danger of explosion! (Figure 10) .
Cleaning the Filter • Gently turn the drum with the open lids to If the pump filter is not regularly front side of the machine (Figure 14) . cleaned, then this may adversely affect the performance of the machine. Figure 14 Cleaning the pump filter This filter collects bits of fluff and small objects, e.g.
Troubleshooting minor faults Malfunctions of the washing machine are indicated on the display panel. Flashing indicator Cause / Remedial action No water flows in. Open tap and press the ”Start“ button again. This malfunction may be caused by an improper water supply hose connection (see chapter ”APPLIANCE CONNECTIONS: Water-inlet hose“).
Page 24
- Pull out mains plug for 10 s. - Reinsert mains plug. - Select programme and start again. If the indicated malfunction remains, the service department is to be notified. SUGGESTION: Disconnect washing machine from mains and turn off tap.
The lid does not open The lid remains locked during the entire time of the programme. • The washing machine has not been used for a long time. The drum lid opens too • The washing machine is in a room that is too cold.
Customer Service Every washing machine that leaves our factory is carefully checked to ensure that it is functioning properly and is free of defects. If there are any questions - especially in regards to installing and connecting the washing machine - our Customer Service is at your disposal.