Cisco DPC2434 User Manual page 122
Voip wireless home gateway
Hide thumbs
Also See for DPC2434:
- Datasheet (10 pages) ,
- Installation and operation manual (114 pages)
Table of Contents
Advertisement
How Do I Configure the Wireless Home Gateway?
Field Name
Network Keys
1 through 4
64 bit keys
or
Network Keys
1 through 4
128 bit keys
122
Description
Select these keys for use with Encryption Mode set to 64-bit
encryption. Enter 5-byte values for a Key. You do not have to
set all four Keys. Only one Key is used for a home network.
Each value is represented in hexadecimal. Use only these
numbers or letters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, and f to
set up your encryption keys.
Note: It is generally a good practice to use only lowercase
letters when entering WEP encryption keys. Uppercase
letters can sometimes be confused with numbers. For
example, the uppercase letter "B" is often mistaken for the
number "8." Using lowercase characters minimizes the risk
of confusing characters when copying keys from one device
to another. Uppercase characters will automatically be
converted to lowercase when the key or keys are applied and
saved to memory.
Use two numbers or letters in each box. Record your Key
values. You will need these Key values when you set up
your client wireless adapter. The Key values in each wireless
network device must match.
Select these keys for use with Encryption Mode set to 128-bit
encryption. Enter 13-byte values for a Key. You do not have
to set all four Keys. Usually only one is needed for a home
network. Each value is represented in hexadecimal. Use only
these numbers or letters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e,
and f to set up your encryption keys.
It is generally a good practice to use only lowercase letters
when entering WEP encryption keys. Uppercase letters can
sometimes be confused with numbers. For example, the
uppercase letter "B" is often mistaken for the number "8."
Using lowercase characters minimizes the risk of confusing
characters when copying keys from one device to another.
Uppercase characters will automatically be converted to
lowercase when the key or keys are applied and saved to
memory.
Use two numbers or letters in each box. Record your Key
values. You will need these Key values when you set up
your client wireless adapter. The Key values in each wireless
network device must match.
4011350 Rev D
Advertisement
Table of Contents
