Safety Instructions - Husqvarna FS 513 Operator's Manual
Floor saw fs 513; fs 520; fs 524
Hide thumbs
Also See for FS 513:
- Operator's manual (44 pages) ,
- Spare parts (29 pages) ,
- Operator's manual (136 pages)
Table of Contents
Advertisement
Available languages
Available languages
General use
WARNING!
Before operating machine, read and under-
stand this entire operation manual & engine
operation manual supplied with engine.
Be familiar with machine before operation!
The working area must be completely
clear, well lit and all safety hazards
removed.
Any persons not involved in the work,
should leave the area.
WARNING! Do not contact the tool when
machine is in operation.
Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which
frequently contains silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other
minerals and rocks. Exposure to excessive amount of such dust can cause:
•
Respiratory diseases (affecting your ability to breath), including chronic bronchitis, silicosis and pulmo-
nary fibrosis from exposure to silica. These diseases may be fatal;
Skin irritation and rash; and
•
•
Cancer according to NTP* and IARC*
* National Toxicology Program, International Agency for Research on Cancer
Take precautionary steps
Avoid inhalation of and skin contact with dust, mist and fumes;
•
Wet cut when feasible, to minimize dust;
•
•
Wear and ensure that all bystanders wear appropriate respiratory protection such as dust masks de-
signed to filter out microscopic particles. (See OSHA 29 CFR Part 1910.1200)
Use of this product can cause exposure to materials known to the State of California to cause cancer and/or birth
defects or other reproductive harm.
SAFETY INSTRUCTIONS
Operator must wear
personal protective
equipment & cloth-
ing appropriate to the
work he is doing.
Personal protective
equipment, such as
hearing & eye protec-
tion, is mandatory.
DUST WARNING
California Prop 65 Warning:
Fuel Safety:
WARNING! Take care when handling
fuel. Bear in mind the risk of fire, explo-
sion and inhaling fumes.
• Only store fuel in containers approved for the purpose.
• Only refuel machine with engine OFF. Never remove fuel
cap and fill the fuel tank while the engine is running.
• Always refuel in a well ventilated area.
• Never fill a fuel tank indoors.
• Allow engine to cool before refueling.
Never fuel machine in vicinity of sparks or
flames. Do not use machine in flammable
area.
Do not smoke while fueling or using the
machine.
• Move machine 0 feet ( meters) from refueling point
before starting engine.
• Never start the machine:
) If fuel has been spilled on the machine. Wipe
off spillage and allow remaining fuel to evaporate.
) If you have spilled fuel on yourself or your
clothes. Use soap and water to wash any part of
your body that has come in contact with fuel.
) If the machine is leaking fuel. Check regularly
for leaks from the fuel cap and fuel lines.
• Store and transport machine and fuel so that there is
no risk of any leakage or fumes coming into contact with
sparks or flames, for example, electrical machinery or
electric motors, electrical relays / switches, or boilers.
9
Hide quick links:
Advertisement
Chapters
Table of Contents
