Line Configuration Mode - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Using the Command-Line Interface

CLI Command Modes

Enter the vlan database privileged EXEC command to access VLAN configuration mode:

Switch# vlan database

Switch(vlan)#

The supported commands can vary depending on the version of software in use. To view a

comprehensive list of commands, enter a question mark (?) at the prompt:

Switch(vlan)# ?

To return to privileged EXEC mode, enter the abort VLAN configuration command to abandon the

proposed database. Otherwise, enter exit to implement the proposed new VLAN database and to return

to privileged EXEC mode. When you enter exit or apply, the configuration is saved in the VLAN

database; configuration from VLAN configuration mode cannot be saved in the switch configuration

Line Configuration Mode

Line configuration commands modify the operation of a terminal line. Line configuration commands

always follow a line command, which defines a line number. Use these commands to change terminal

parameter settings line-by-line or for a range of lines.

Use the line vty line_number [ending_line_number] command to enter line configuration mode. The

new prompt means line configuration mode. The following example shows how to enter line

configuration mode for virtual terminal line 7:

Switch(config)# line vty 0 7

The supported commands can vary depending on the version of software in use. To view a

comprehensive list of commands, enter a question mark (?) at the prompt:

Switch(config-line)# ?

To exit line configuration mode and to return to global configuration mode, use the exit command. To

exit line configuration mode and to return to privileged EXEC mode, enter the end command, or press

Catalyst 3550 Multilayer Switch Command Reference

Table of Contents