Snmp Trap Mac-Notification - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

snmp trap mac-notification

Use the snmp trap mac-notification interface configuration command to enable the Simple Network

Management Protocol (SNMP) MAC address notification trap on a specific Layer 2 interface. Use the

no form of this command to return to the default setting.

Syntax Description

By default, the traps for both address addition and address removal are disabled.

Command Modes

Interface configuration

Command History

Usage Guidelines

Even though you enable the notification trap for a specific interface by using the snmp trap

mac-notification command, the trap is generated only when you enable the snmp-server enable traps

mac-notification and the mac address-table notification global configuration commands.

This example shows how to enable the MAC notification trap when a MAC address is added to an

Switch(config)# interface fastethernet0/4

Switch(config-if)# snmp trap mac-notification added

You can verify your settings by entering the show mac address-table notification interface privileged

EXEC command.

Related Commands

clear mac address-table

mac address-table notification

snmp trap mac-notification {added | removed}

no snmp trap mac-notification {added | removed}

Enable the MAC notification trap whenever a MAC address is added on this

Enable the MAC notification trap whenever a MAC address is removed from this

Modification

This command was introduced.

notification

Clears the MAC address notification global counters.

Enables the MAC address notification feature.

Catalyst 3550 Multilayer Switch Command Reference

snmp trap mac-notification

Table of Contents