Cluster Run - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Catalyst 3550 Switch Cisco IOS Commands

cluster run

Use the cluster run global configuration command to enable clustering on a switch. Use the no form of

this command to disable clustering on a switch.

Syntax Description

This command has no arguments or keywords.

Clustering is enabled on all switches.

Command Modes

Global configuration

Command History

Usage Guidelines

When you enter the no cluster run command on a command switch, the command switch is disabled.

Clustering is disabled, and the switch is incapable of becoming a candidate switch.

When you enter the no cluster run command on a member switch, it is removed from the cluster.

Clustering is disabled, and the switch is incapable of becoming a candidate switch.

When you enter the no cluster run command on a switch that is not part of a cluster, clustering is

disabled on this switch. This switch cannot then become a candidate switch.

This example shows how to disable clustering on the command switch:

Switch(config)# no cluster run

You can verify your setting by entering the show cluster privileged EXEC command.

Related Commands

show cluster

no cluster run

Modification

This command was introduced.

Displays the cluster status and a summary of the cluster to which the switch

Catalyst 3550 Multilayer Switch Command Reference

Table of Contents