Cisco Catalyst 3550 Command Reference Manual page 360
Multilayer switch
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (662 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
show controllers ethernet-controller
Table 2-16
Receive Field Descriptions (continued)
Field
FCS errors
Oversize frames
Undersize frames
Collision fragments
Minimum size frames
65 to 127 byte frames
128 to 255 byte frames
256 to 511 byte frames
512 to 1023 byte frames
1024 to 1518 byte frames The total number of frames that are from 1024 to 1518 bytes.
Flooded frames
Overrun frames
VLAN filtered frames
Source routed frames
Valid oversize frames
Pause frames
Symbol error frames
Invalid frames, too large
Valid frames, too large
Invalid frames, too small
Valid frames, too small
1. FCS = frame check sequence
2. MTU = maximum transmission unit
Related Commands
Catalyst 3550 Multilayer Switch Command Reference
2-334
Description
The total number of frames received on an interface that have a valid length (in bytes) but do not
have the correct FCS values.
The number of frames received on an interface that are larger than the maximum allowed frame
size.
The number of frames received on an interface that are smaller than 64 bytes.
The number of collision fragments received on an interface.
The total number of frames that are the minimum frame size.
The total number of frames that are from 65 to 127 bytes.
The total number of frames that are from 128 to 255 bytes.
The total number of frames that are from 256 to 511 bytes.
The total number of frames that are from 512 to 1023 bytes.
The total number of flooded frames received on an interface.
The total number of overrun frames received on an interface.
The total number of frames that are filtered because of the VLAN information in the frame, such
as an IEEE 802.1Q tag or a VLAN ID other than the IDs configured on the interface. This value
does not include frames that are smaller than 64 bytes or larger than the maximum frame size
The total number of frames received on an interface that are dropped because the source route bit
is set in the source address of the native frame. This value includes frames that have a valid FCS
value and are between 64 bytes and the maximum allowed frame size.
The number of frames received on an interface that are larger than the maximum allowed frame
size and have valid FCS values. The frame size includes the FCS value but does not include the
VLAN tag.
The number of pause frames received on an interface.
The number of frames received on an interface that have symbol errors.
The number of frames received that were larger than maximum allowed MTU
the FCS bits and excluding the frame header) and that have either an FCS error or an alignment
error.
The number of frames received on an interface that are larger than the maximum allowed frame
size.
The number of frames received that are smaller than 64 bytes (including the FCS bits and
excluding the frame header) and that have either an FCS error or an alignment error.
The number of frames received on an interface that are smaller than 64 bytes (or 68 bytes for
VLAN-tagged frames) and have valid FCS values. The frame size includes the FCS bits but
excludes the frame header bits.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
2
size (including
OL-8566-01
Advertisement
Chapters
Table of Contents
