Show Power Inline - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

show power inline

Use the show power inline user EXEC command to display the power status for the specified Power

over Ethernet (PoE) port or for all PoE ports on the Catalyst 3550-24PWR switch.

Syntax Description

interface-id

Command Modes

Command History

12.1(12c)EA1

Usage Guidelines

This command is supported only on PoE-capable ports. PoE ports were previously referred to as inline

power ports in earlier versions of the command reference.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show power inline command:

Switch> show power inline

Interface Admin

--------- ------ ---------- ------- ------------------- ----- ----

Catalyst 3550 Multilayer Switch Command Reference

show power inline [interface-id] | {begin | exclude | include} expression]

(Optional) ID of the interface.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

The Class field was added to the output.

The Max field was added to the output.

Cisco IP phone 7960 n/a

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

Table of Contents