Cisco 1900 series Hardware Installation page 101
Hide thumbs
Also See for 1900 series:
- Quick start manual (8 pages) ,
- Brochure (411 pages) ,
- Manual (111 pages)
Table of Contents
Advertisement
Chapter 6
Configuring the Router
Command or Action
Step 5
description string
Example:
Router(config-if)# description GE int to 2nd
floor south wing
Step 6
ip address ip-address mask
Example:
Router(config-if)# ip address 172.16.74.3
255.255.255.0
Step 7
no shutdown
Example:
Router(config-if)# no shutdown
Step 8
end
Example:
Router(config)# end
Step 9
show ip interface brief
Example:
Router# show ip interface brief
Examples
Configuring the GigabitEthernet Interface: Example
!
interface GigabitEthernet0/0
description GE int to HR group
ip address 172.16.3.3 255.255.255.0
duplex auto
speed auto
no shutdown
!
Sample Output for the show ip interface brief Command
Router# show ip interface brief
Interface
GigabitEthernet0/0
GigabitEthernet0/1
Router#
OL-19084-02
Purpose
(Optional) Adds a description to an interface configuration.
•
The description helps you remember what is attached to
this interface. The description can be useful for
troubleshooting.
Sets a primary IP address for an interface.
Enables an interface.
Returns to privileged EXEC mode.
Displays a brief status of the interfaces that are configured
for IP.
Verify that the Ethernet interfaces are up and
•
configured correctly.
IP-Address
OK? Method Status
172.16.3.3
YES NVRAM
unassigned
YES NVRAM
Performing the Initial Configuration on the Router
up
administratively down down
Cisco 1900 Series Hardware Installation
Protocol
up
6-15
- Quick Links:
- Hardware Features
- Led Indicators
Hide quick links:
Advertisement
Table of Contents
