Appendix; Raid Controller Considerations; Supported Raid Controllers And Required Cables - Cisco UCS C210 Installation And Service Manual
Generations m1 and m2
Hide thumbs
Also See for UCS C210:
- Installation and service manual (114 pages) ,
- Configuration manual (88 pages) ,
- Setup (10 pages)
Table of Contents
Advertisement
RAID Controller Considerations
This appendix contains the following sections:
•
•
•
•
•
•
•
•
•
•
Supported RAID Controllers and Required Cables
This server supports the RAID controller options and cable requirements shown in
Note
This server contains a default drive backplane called an extender, which supports controller connection
for up to 8 drives. To control more than 8 drives (maximum 16), the server must be ordered with the
optional expander backplane. The extender/expander backplanes are not field-upgradeable.
Different cables might be required when connecting to the extender versus the expander, as described in
Note
Table
Do not mix controller types in the server. Dual controllers are not supported.
Note
OL-20887-02
Supported RAID Controllers and Required Cables, page C-1
Enabling the Integrated Intel ICH10R RAID Controller in the BIOS, page C-2
Enabling the Mezzanine Card RAID Controller in the BIOS, page C-3
RAID Controller Cabling, page C-3
How to Determine Which Controller Is in Your Server, page C-4
How to Disable Quiet Boot for CIMC Firmware Earlier Than Release 1.2(1), page C-5
How To Launch Option ROM-Based Controller Utilities, page C-5
LSI MegaRAID Card Beep Codes, page C-6
Restoring RAID Configuration After Replacing a RAID Controller, page C-6
For More Information, page C-7
C-1.
A P P E N D I X
Cisco UCS C210 Server Installation and Service Guide
C
Table
C-1.
C-1
Advertisement
Table of Contents
