Show Errdisable Recovery - Cisco Catalyst 4500 Series Command Reference Manual
Cisco ios command reference
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
show errdisable recovery
To display error disable recovery timer information, use the show errdisable recovery command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
12.1(19)EW
Examples
This example shows how to display recovery timer information for error disable:
Switch# show errdisable recovery
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
vmps
pagp-flap
dtp-flap
link-flap
l2ptguard
psecure-violation
gbic-invalid
dhcp-rate-limit
unicast-flood
storm-control
arp-inspection
Timer interval:30 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Fa7/32
OL-25342 -01
show errdisable recovery
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Display includes the status of storm control.
Timer Status
--------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Errdisable reason
-----------------
arp-inspect
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Time left(sec)
--------------
13
show errdisable recovery
2-659
Advertisement
Chapters
Table of Contents
