Modem Selection; Dialing Properties; Connecting - Toshiba Satellite L20 Series User Manual
Hide thumbs
Also See for Satellite L20 Series:
- User manual (256 pages) ,
- User manual (178 pages) ,
- Maintenance manual (264 pages)
Table of Contents
Advertisement
Operating Basics
Open dialog box, if the modem and Telephony Current
Location region code do not match.
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
Connecting
To connect the modem cable, follow the steps below.
■
The modular cable that comes with the computer must be used to
connect a modem. Connect the end of the modular cable with the core
to the computer.
■
In case of a lightning storm, unplug the modem cable from the
telephone jack.
■
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as an optical drive or hard disk drive
connected to a 16-bit PC Card, you might experience the following modem
problems:
■
Modem speed is slow or communication is interrupted.
■
Skips may occur in sound.
4-22
Connecting the internal modem
User's Manual
Hide quick links:
Advertisement
Table of Contents
