Shutdown - Cisco Catalyst 2950 Command Reference Manual
Desktop switch
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Chapter 2 Cisco IOS Commands
shutdown
Use the shutdown interface configuration command to disable a port and to shut down the management
VLAN. Use the no form of this command to enable a disabled port or to activate the management VLAN.
Syntax Description
This command has no arguments or keywords.
Command Modes
Interface configuration
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
The shutdown command for a port causes it to stop forwarding. You can enable the port with the no
shutdown command.
The no shutdown command has no effect if the port is a static-access port assigned to a VLAN that has
been deleted, suspended, or shut down. The port must first be a member of an active VLAN before it can
be re-enabled.
Only one management VLAN interface can be active at a time. The remaining VLANs are shut down.
In the show running-config command, the active management VLAN interface is the one without the
shutdown command displayed.
Examples
This example shows how to disable fixed Fast Ethernet port 0/8 and how to re-enable it:
Switch(config)# interface fastethernet0/8
Switch(config-if)# shutdown
Switch(config-if)# no shutdown
You can verify your settings by entering the show interfaces privileged EXEC command.
78-11381-05
shutdown
no shutdown
Modification
This command was first introduced.
Catalyst 2950 Desktop Switch Command Reference
shutdown
2-233
Hide quick links:
Advertisement
Table of Contents
