Cluster Management-Vlan - Cisco Catalyst 2950 Command Reference Manual
Desktop switch
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
cluster management-vlan
cluster management-vlan
Use the cluster management-vlan global configuration command on the command switch to change the
management VLAN for the entire cluster. Use the no form of this command to change the management
VLAN to VLAN 1.
Syntax Description
n
Defaults
The default management VLAN is VLAN 1.
Command Modes
Global configuration
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
Enter this command only on the command switch. This command changes the management VLAN of
the command switch and member switches. Member switches must have either a trunk connection or
connection to the new command-switch management VLAN to maintain communication with the
command switch.
This command is not written to the configuration file.
Examples
This example shows how to change the management VLAN to VLAN 5 on the entire cluster:
Switch(config)# cluster management-vlan 5
You can verify your settings by entering the show interfaces vlan vlan-id privileged EXEC command.
Related Commands
Command
show interfaces
Catalyst 2950 Desktop Switch Command Reference
2-28
cluster management-vlan n
no cluster management-vlan
VLAN ID of the new management VLAN. Valid VLAN IDs are from 1 to 4094
when the enhanced software image (EI) is installed and 1 to 1001 when the
standard software image (SI) is installed. Do not enter leading zeros.
Modification
This command was first introduced.
Description
Displays the administrative and operational status of a switching
(nonrouting) port.
Chapter 2
Cisco IOS Commands
78-11381-05
Hide quick links:
Advertisement
Table of Contents
