Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive cover (see
b.
Hard drive (see
c.
Service cover (see
d.
Keyboard (see
e.
Base enclosure (see
Remove the fan:
1.
Disconnect the fan cable (1) from the system board.
2.
Loosen the 2 captive Phillips screws (2) that secure the fan to the top cover.
3.
Remove the fan (3).
Reverse this procedure to install the fan.
Battery on page
35).
Hard drive cover on page
Hard drive/SSD drive on page
Service cover on page
Keyboard on page
51)
Base enclosure on page
38)
39)
44)
58)
Component replacement procedures
Spare part number
702859-001
63