Removing The Display Assembly (Hp Authorized Service Providers Only) - HP OmniBook XE3 Service Manual
Notebook
Hide thumbs
Also See for OmniBook XE3:
- Evaluator manual (188 pages) ,
- Reference manual (151 pages) ,
- Service manual (117 pages)
Table of Contents
Advertisement
Removing the Display Assembly
(HP Authorized Service Providers Only)
Required Equipment
• Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
• Keyboard cover (page 2-9).
• Keyboard (page 2-11).
3. Remove both screws from the switchboard PCA, and carefully lift the PCA off the connector
underneath it. Be carefully not to pull on the cable attached to the PCA.
4. Disconnect the cable from the switchboard PCA, and remove the PCA from the notebook.
5. Disconnect the cable from the video PCA.
6. Remove the four flanged screws from the display hinges. This may be easier if you support the
display so that it remains approximately flat.
7. Lift the display off of the notebook.
HP OmniBook XE3
Removal and Replacement
2-17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
