System Hold - Siemens optiPoint 500 Quick Reference Manual
Hide thumbs
Also See for optiPoint 500:
- Service manual (120 pages) ,
- Information and important operating procedures (92 pages) ,
- Specification (4 pages)
Table of Contents
Advertisement
To dial using a station speed code:
While the phone is idle,
1. If you have a STATION SPEED key, press it.
2. Dial the station speed code (0 through 9, or 00 through 29).
OR
1. Press the MENU key.
2. Select Speed dial features?.
3. Scroll to Station speed dial? and select it.
ENTER INDEX: will be displayed.
4. Dial the station speed dialing code (0 through 9, or 00
through 29).
OR
1. Get a dial tone, dial
2. Dial the station speed code (0 through 9, or 00 through 29).
System Hold
System Hold lets you move a call to a system slot (a temporary
holding place) and hold it there. The call can then be retrieved
from any extension.
To place a call on system hold:
1. Press the TRANSFER key. You will hear the confirmation
tone and dial tone. Dial
2. Enter a slot number (0-9).
If you hear a busy signal, try a different slot number.
OR
If you hear a fast busy signal, hang up. A fast busy signal
means that all slots are full and you cannot place a call on
system hold at this time.
30 optiPoint 500 Display Phones
.
3
.
8
Hide quick links:
Advertisement
Table of Contents
