Checking The Power Supply Voltage - Sony SRW-9000 Operation Manual
Hd camcorder/hd-sdi expansion board/rgb 4:4:4processor board
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (207 pages)
Table of Contents
Advertisement
<MARKER SETTING> page
Item
Function
CURSOR
Select the type (BOX/CROSS) of the
cursor to be displayed.
POS1 H/V
Set the H (horizontal) position
(–958 to +956) and the V (vertical)
position (–538 to +536) of the center.
SIZE W/H
Set the width (from the center to right
or left side) (16 to 1920) and the
height (from the center to top or
bottom) (16 to 1080) of the cursor.
Checking the Power Supply
Voltage
You can check the NEAR END and END
settings, which specify trigger values for low
voltage warnings, on the <BATTERY ALARM>
page of the Camera >USER (OPERATION)
menu.
<BATTERY ALARM> page
Item
Indication
BATT TYPE
Selects the type of battery to
check.
NEAR END
Displays the NEAR END value of
the battery selected with BATT
TYPE.
END
Displays the END value of the
battery selected with BATT TYPE.
DCIN TYPE
Selects the type of power supply to
check.
Item
Indication
NEAR END
Displays the NEAR END value of
the power supply selected with
DCIN TYPE.
END
Displays the END value of the
power supply selected with DCIN
TYPE.
The only items that can be changed on this page
are the two TYPE items, which specify the type of
battery or power supply to check. If you want to
change the values, use the <BATT ALARM
SET> page of the Camera >MAINTENANCE
menu.
Viewing Settings and Indications in the Viewfinder
63
Advertisement
Table of Contents
