Page 3
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y COMPONENTS DESCRIPTION SUB-CIRCUIT UNIT (X16-2510-10/X16-2722-70) Ref. No. Application / Function Operation / Condition / Compatibility Panel µcom 3.3V Regulater The power supply of IC and VFD (Logic) which are driven by 3.3V Remote Control IC Buffer IC It is change into 3.3V from 5V FL BLK SW VFD is turned on when Q1’s base level goes “H”...
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION SYSTEM MICROCOMPUTER : 30624MGPA27GP (X34 : IC1) Truth Value Pin No. Pin Name Module Application Processing Operation Description Table Not used Output : L OPEL_REMO EXTRA External display remote control input BYTE 0V GND direct connection Used when writing to system µcom...
Page 6
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Pin No. Pin Name Module Application Processing Operation Description Table PM_MOT1 P-MECHA Panel motor control 1 Refer to truth value table. PM_MOT2 P-MECHA Panel motor control 2 Refer to truth value table. FLASH EPM input terminal...
Page 7
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Processing Operation Description Pin No. Pin Name Module Application Table OPEL_CE EXTRA External display control request External display EXT_CONT EXTRA External amp control P_CON Power supply I/O External amp control terminal Power ON : H, Power OFF : Hi-Z, All OFF : Hi-Z...
Page 8
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION Truth Value Table w Panel Motor Control u E’s Light Truth Value Table OPEN CLOSE STOP WAIT E’s-SW (16 pin) E’s1(67 pin) E’s2 (66 pin) PM_MOT1 WOW-ON FLAT Hi-Z Hi-Z PM_MOT2 WOW-OFF FLAT Hi-Z E’s Light 100Hz...
Page 9
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION PANEL MICROCOMPUTER : 30622MWP111GP (X16-251 : IC1) Pin No. Pin Name Module Application Processing Operation Description Not used Output : L REMO REMO Remote control signal input Pulse width DET GSO0 FL dot section data output terminal 0...
Page 10
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y MICROCOMPUTER’S TERMINAL DESCRIPTION Pin No. Pin Name Module Application Processing Operation Description Used when rewriting µcom 45~49 Not used Output : L PON_DC_DC Power supply I/O DC/DC control terminal H : FL+B ON, Hi-Z : FL+B OFF BLUE_LED...
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y TEST MODE How to enter the Test Mode Special Display in the TUNER Mode Reset while pressing both [1] key and [3] key. In the TUNER mode, there are abnormalities in the front end, etc. when the following displays are made.
Page 12
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y TEST MODE Audio Related Matters Backup Current Measurement • When [Q] key is pressed intermittently, audio adjust mode When reset in the Acc OFF (Back Up ON) condition, MUTE is entered. terminal goes off in 2 seconds instead of 15 seconds. (When •...
Page 13
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y TEST MODE Initializing AUDIO Related Value Settings Frequency Spun Switching (K/M type) During STANDBY, by pressing key intermittently, AU- While pressing [1] key and [5] key, turn power ON. DIO setting values will reset to the default values of the Test Mode.
Page 18
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y PC BOARD (COMPONENT SIDE VIEW) CD PLAYER UNIT X32-5500-00 (J74-1552-12) RFOK CP12 CP13 CP15 MIACK X32-5500-00 Ref. No. Address Refer to the schematic diagram for the values of resistors and capacitors.
Page 19
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y PC BOARD (FOIL SIDE VIEW) CD PLAYER UNIT X32-5500-00 (J74-1552-12) Vref FLAG HOLD MIRR LOCK TRK IN TRK OUT FCS DOWN FCS UP C22 C23 D3.3V DAVdd3.3V SDIO BCKIA 12EJE A.+8V LRCKIA /EJECT SLED IN SLED OUT A.GND...
Page 20
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SUB-CIRCUIT UNIT SUB-CIRCUIT UNIT X16-2510-10 (J76-0026-22) X16-2510-10 (J76-0026-22) X16-2722-70 (J74-1574-02) X16-2722-70 (J74-1574-02) R904 R905 CP11 CP10 CP12 D901 FLGND PRST PSDA PREQ DGND X16-2510-10 X16-2510-10 X16-2722-70 X16-2722-70 Ref. No. Address Ref.
Page 21
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y ∗ 1 GND REMO O CE PRE OUT 4 O CLK O DATA FRONT REAR/NF (X34-301x-xx) (X34-3222-70) L301 R504 C501 C509 0.01 0.01 ∗ C507 PRE-OUT MUTE SW 0.01 DRIVER RFGND R420 R421 R408 R409 D403 FMANTIN D301...
Page 24
100u16 • DC voltages are as measured with a high impedance voltmeter. Values may vary FL&ILL AVR slightly due to variations between indi- TP64 vidual instruments or/and units. KDC-MP6025/MP625/MP858/W6527/W6527Y (1/2) X34-301x-xx/X34-3222-70 (4/5)
Page 25
KDC-MP6025/MP625/MP858 KDC-W6527/W6527Y (X34-3xxx-xx) C210-212,459, C402,405, C464,465, MODEL NAME UNIT No. C300 C321 C322 WHT/BLK GRN/BLK 460,476,477 410,411 468,469 GRY/BLK VIOL/BLK KDC-MP625 X34-3010-10 YES NO X86-3760-11 VIOL KDC-MP6025 X34-3010-11 X86-3760-11 KDC-MP858 X34-3010-21 NO YES X86-3760-11 P CONT KDC-757 X34-3010-22 X86-3760-11 BLU/WHT PNK/BLK EXT.
Page 27
• DC voltages are as measured with a high impedance volt- meter. Values may vary Q7,9 Q8,10 GREEN FL GND LED SW slightly due to variations be- LED SW LED SW tween individual instruments or/and units. KDC-MP6025/MP625/MP858/W6527/W6527Y (2/2) X16-2510-10/X16-2722-70 (2/2)