Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-MP6039
Summary of Contents for Kenwood KDC-MP6039
- Page 1 CD-RECEIVER KDC-MP6539U KDC-MP6039 INSTRUCTION MANUAL © B64-4044-00/00 (MW)
-
Page 2: Table Of Contents
Audio Preset Memory Audio Preset Recall TV control (Optional) Basic Operation Preset Memory Preset Tuning Direct TV Tuning KDC-MP6539U/ KDC-MP6039 Basic Operations of remote control 19 Appendix Accessories/ Installation Procedure 22 Connecting Wires to Terminals Installation/Removing the Unit Troubleshooting Guide Specifications 中文字型由北京字研技术开发中心提供... -
Page 3: Before Use
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed. -
Page 4: Basic Operation
Attenuator [ATT] Turning the volume down quickly. When the volume is reduced, the “ATT” indicator flashes. KDC-MP6539U/ KDC-MP6039 [ATT] Disc slot Muting volume upon reception of phone call When there is a call, “CALL” is displayed and the audio [SRC] system is paused. -
Page 5: Tuner Functions
⁄ • Use the mini-plug cable which is stereo type and does not have any resistance. • The auxiliary input requires the setting made in “MENU” > “Built in AUX” of <Function Control> (page 6). Subwoofer output Control knob Switches between ON (“SUBWOOFER ON”) and OFF (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds. -
Page 6: Function Control
“ON”/ — FoREP “ON”/ — SCAN “ON”/ — “ON”/ — KDC-MP6539U/ KDC-MP6039 Entry Setting overview 1 sec. Sets security code Sets the source selection method. When set to “ON”, allows you to select music in the manner similar to that of the iPod. - Page 7 D.REP “ON”/ — *Factory setting * Function of KDC-MP6539U. * Function of KDC-MP6039. Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. : Can be set in other than standby state.
-
Page 8: Display Settings
• 1 Text display part 2 Status display 3 Icon display part 4 Spectrum Analyzer display 5 Clock display 6 Display (varied depending on the source) KDC-MP6539U/ KDC-MP6039 Text Display Selection Changing the text display. In Tuner source Information Station name Frequency Spectrum Analyzer &... -
Page 9: Key Color Selection
Enter Text Display Selection mode (In Display Type A/ B/ C/ D/ F) Select “DISP” > “TEXT”. For how to select Function Control item, refer to <Function Control> (page 6). Select the text display part (Display Type A/ B/ C/ D only) Push the Control knob towards up or down. -
Page 10: Station/Disc Naming (Snps/Dnps)
CD changer/ player. Refer to the CD changer/ player manual. • Change the title of station/CD by the same operation used to name it. KDC-MP6539U/ KDC-MP6039 Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source. -
Page 11: Music Disc/Audio File Operation
Music disc/Audio file Operation Function of Audio file/ Internal CD source Music Select Selecting the music you want to listen to from the device or media being played now. Enter Music Select mode Turn the Control knob. The music list is displayed. Search for music Select the category item using the Control knob. -
Page 12: Tuner Operation
Turn the Control knob. Recall the station Press the Control knob. Cancelling Preset Tuning Press the [FNC] button. KDC-MP6539U/ KDC-MP6039 Function of remote control Direct Access Tuning Entering the frequency and tuning. Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. -
Page 13: Other Functions
Other Functions Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ⁄ • When you activate the Security Code function, it cannot be released. -
Page 14: Manual Clock Adjustment
Turn the Control knob or push it towards up or down. Exit Date adjustment mode Press the [FNC] button. KDC-MP6539U/ KDC-MP6039 Demonstration mode setting Turning the demonstration mode ON/OFF. Select Demonstration item during Menu mode Select the “DEMO Mode” display. -
Page 15: Audio Adjustments
Audio Adjustments Audio Control You can adjust following Audio Control items ; Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Subwoofer level “SUB-W LEVEL” –15 — +15 System Q “NATURAL”/ Natural/User setting/Rock/ “USER”/“ROCK”/ Pops/Easy/Top 40/Jazz “POPS”/“EASY”/ (The indicator turns on “TOP40”/“JAZZ”... -
Page 16: Speaker Setting
Select the Speaker type Turn the [AUD] knob. Exit Speaker Setting mode Press the [AUD] knob. KDC-MP6539U/ KDC-MP6039 Audio Preset Memory Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. Setup Sound Control Refer to the following operations to setup the Sound Control. -
Page 17: Audio Preset Recall
Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 16). Select the source For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page Select Audio Preset item during Menu mode (Other than Standby mode) Select the “Audio Preset”... -
Page 18: Tv Control (Optional)
Allow the determined number to take effect Press the Control knob. Cancelling the Preset Memory mode Press the [FNC] button. KDC-MP6539U/ KDC-MP6039 Preset Tuning Recalling the TV channels in the memory. Enter Preset Tuning Select mode Turn the Control knob. -
Page 19: Basic Operations Of Remote Control
Basic Operations of remote control FM/AM 2-ZONE 0 — 9 General control Volume control [VOL] Source select [SRC] Volume reduce [ATT] In Audio control Audio item select [AUD] Adjusts the Audio item [VOL] ⁄ • Refer to <Audio Control> (page 15) for the operation method, such as the procedures for Audio control and others operations. -
Page 20: Appendix
• When the iPod is connected to this unit, “KENWOOD” or “✓” is displayed on the iPod to indicate that you cannot operate the iPod. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered. -
Page 21: Laser Product
<Registering to the Preset Dial Number List> 1. Operation is the same. Refer to the instruction manual of KCA-BT100. 2. Press the [FNC] button. 3. Select the number to memory by turning the Control knob. 4. Press the Control knob for at least 1 second. <Deleting a Registered Cell-Phone>... -
Page 22: Accessories/ Installation Procedure
• Mount the unit so that the mounting angle is 30° or less. About CD players/disc changers connected to this unit If the CD player/ disc changer has the “O-N” switch, set it to the “N” position. The functions you can use and the information that can be displayed may differ depending on the models being connected. -
Page 23: Connecting Wires To Terminals
Connect to the terminal that is grounded when either the telephone rings or during conversation. MUTE ⁄ To connect the Kenwood navigation system, consult your navigation manual. To car light control switch ILLUMI Car fuse box... -
Page 24: Installation/Removing The Unit
ø5mm ø5mm Accessory3...for Nissan car Accessory4...for Toyota car KDC-MP6539U/ KDC-MP6039 Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. -
Page 25: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. •... - Page 26 • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. KDC-MP6539U/ KDC-MP6039 USB ERROR (Blink): Some trouble may have occurred to the connected USB device.
-
Page 27: Specifications
: Below Measurable Limit Frequency response (±1 dB) : 10 Hz – 20 kHz Total harmonic distortion (1 kHz) KDC-MP6539U: 0.008 % KDC-MP6039: 0.010 % Signal to Noise ratio (1 kHz) KDC-MP6539U: 110 dB KDC-MP6039: 105 dB Dynamic range : 93 dB...