Edit Line Text Label For Phone Display - Cisco Unified 8961 User Manual
User guide for cisco unified communications manager 9.0 (sip)
Hide thumbs
Also See for Unified 8961:
- Administration manual (378 pages) ,
- User manual (148 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
User Options Web Pages
• Use System Default
• Disable
• Flash Only
• Ring Once
• Ring
• Beep Only [this option is only available for Ring Setting (Phone Active)]
Step 6
Select Save.
Edit Line Text Label for Phone Display
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Line Text Label area, enter a text label.
Step 6
Select Save.
Speed Dial Setup in User Options
Depending on how your phone has been set up, you can use speed-dial buttons and speed-dial codes, which
you can set up on your User Options web pages.
Speed Dial Pause
You can use Speed Dial to reach destinations that require a Forced Authorization Code (FAC), Client Matter
Code (CMC), dialing pauses, or additional digits (such as a user extension, a meeting access code, or a voice
mail password). When you press the configured Speed Dial, the phone establishes the call to the destination
number and sends the specified FAC, CMC, and additional digits with dialing pauses inserted.
To include dialing pauses in the speed dial, include a comma (,) as part of the speed-dial string. This comma
specifies a pause of 2 seconds. It also allows you to separate FAC and CMC from the other digits in the
speed-dial string.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
Speed Dial Setup in User Options
119
Advertisement
Chapters
Table of Contents
Troubleshooting
