Table of Contents
Advertisement
Overview
Installing/Removing SFP Modules
The housing has 4 ports that can be configured with electrical or optical small
form-factor pluggable (SFP) modules. The SFP transceivers have three different
types of latching devices used to secure and detach the SFP module from a
Gigabit Ethernet port:
The Tab SFP transceiver (a)
The Button SFP transceiver (b)
The Cam Latch SFP transceiver (c)
a
WARNING:
Invisible laser radiation may be emitted from disconnected optical fibers or
connectors. Do not stare into beams or view directly with optical instruments.
Notes:
When the cables are extracted from the SFP transceiver, insert a clean rubber
dust plug into the SFP transceiver to protect the transceiver.
Clean the optic surface of the fiber cables before inserting into an optical SFP
transceiver.
To Install an SFP Module
Slide the SFP module into the housing located on the back of the RF Gateway
1
1.
Note:
Before inserting a Cam Latch SFP module, close the latch as shown below.
2
Gently pull on the SFP module to make sure the module is locked in place.
6
b
c
4034004 Rev B
Advertisement
Table of Contents
