Figure 12 Gigabit Ethernet Crossover Cable Pin Connections
Two-Port Copper Gigabit Ethernet Network
Interface Card
All NICs installed in a 105s are installed into slots on the gateway. Gigabit
Ethernet NICs can occupy any of the slots or subslots in a gateway that other
NICs do not occupy.
Note
Copper Gigabit Ethernet NICs you use in 105s gateways need to be the
Version 2 type, as indicated on the right end of the NIC faceplate. These
NICs are sold by Nokia under the order code NIF4425.
Copper Gigabit Ethernet NIC Features
The copper Gigabit Ethernet NIC supports the following features:
Nokia 105s Gateway Installation Guide
Supports traffic at 10, 100, and 1000 Mbps
High bandwidth
Half-duplex mode operation up to 100 Mbps
Two-Port Copper Gigabit Ethernet Network Interface Card
1
2
3
4
5
6
7
8
00020
1
2
3
4
5
6
7
8
63