Table of Contents
Advertisement
7
Operation Mode and Operating
7.1
First start-up
7.1.1
Switching on the UPS
Insert the plug of the power cord into the correctly fused power
outlet of your sub-distribution system. The UPS will be
immediately supplied with power from the public power network.
It will start up with an initialization phase, indicated by the AEG
logo, which appears on the screen for 5 seconds. After that, you
will see the following message:
Now confirm the highlighted "UPS On" command by pressing
"ENTER". Hold the key pressed for approx. 1 second. The UPS
will synchronize and switch into normal operating mode after just
a few seconds. The display will switch to the UPS status display.
i
7.1.2
Switching off the UPS
If the UPS is in operation, it is possible to access the command
above by pressing "▲" when in the basic UPS status screen.
Once you have confirmed the command again, the UPS will
switch off or switch to bypass (depending on the setting
selected).
To enable you to find the "UPS On" or "UPS Off" menu item
more easily, the following symbol appears above the "▲" key:
UPS On
If there are no keys pressed for 5 minutes, the
display will automatically switch back to the UPS
status display. Press "▲" to return.
UPS Off
Confirm: yes
no
39
EN
Hide quick links:
Advertisement
Table of Contents
