Table of Contents
Advertisement
How the cooktop is operated
The cooktop is equipped with electronic sensor controls
which react to finger contact.
To operate the cooktop, touch the relevant sensor. Each time
you touch a sensor, an audible tone sounds.
In order to set or alter a power level or the time (depending
on model), the cooking zones and the timer must be "active".
To activate a cooking zone or the timer, touch the sensor for
selecting the relevant cooking zone or the timer. After you
have touched the sensor, the relevant cooking zone or timer
display will start to flash. The cooking zone or the timer is
"active" whilst the displays are flashing and you can set a
power level or time.
Exception:
If only one of the cooking zones is in operation, you can alter
the power level without activating the cooking zone.
Take care to keep the control panel clean and do not
place anything on top of it. The sensors may fail to react or
they could mistake the article or any dirt for a fingertip
contact, thereby activating a function or even causing the
cooktop to switch off automatically (see " Safety
switch-off"). Do not place hot pans on the sensors. The
electronic unit underneath could get damaged.
Operation
25
Hide quick links:
Advertisement
Table of Contents
