Safety Instructions For Installation - Miele KM 6366-1 Operating And Installation Instructions
Ceramic cooktops with induction
Hide thumbs
Also See for KM 6366-1:
- Operating and installation instructions (68 pages) ,
- Operating and installation instructions (64 pages) ,
- Operating and installation instructions (69 pages)
Table of Contents
Advertisement
The appliance must only be installed and connected to the electricity supply
by a suitably qualified and competent person in strict accordance with current
national and local safety regulations.
Fit the wall units and rangehood before fitting the cooktop to avoid damaging
the cooktop.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.
The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.
This cooktop must not be installed above ovens unless these
have a built-in cooling fan.
After installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.
The connection cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.
Observe carefully the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.
Safety instructions for installation
47
Hide quick links:
Advertisement
Table of Contents
