Table of Contents
Advertisement
RM-235
RF troubleshooting
3. Use the following settings in the TX control window:
Figure 27 Phoenix WCDMA TX control window
Note:
Use the Start level option to set the TX power level.
4. Click Send to enable the settings and activate TX.
If settings are changed (eg. new channel), you have to click RF Stop and Send again.
5. Use the CMU200 to check the WCDMA power.
Issue 1
COMPANY CONFIDENTIAL
Page 4 –17
Copyright © 2008 Nokia. All rights reserved.
Advertisement
Chapters
Table of Contents
Troubleshooting
