Toro 22196 Operator's Manual page 19

21in heavy-duty recycler/rear bagger lawn mower

Hide thumbs Also See for 22196:

Table of Contents

Enlarged version

•

Cut the grass more frequently.

•

Overlap cutting swaths instead of cutting a full swath

with each pass.

•

Set the cutting height on the front wheels one notch

lower than the rear wheels. For example, set the front

wheels at 2-1/4 inches (57 mm) and the rear wheels at

2-3/4 inches (70 mm).

Cutting Leaves

•

After cutting the lawn, ensure that half of the lawn shows

through the cut leaf cover. You may need to make more

than one pass over the leaves.

•

For light leaf coverage, set all the wheels at the same

cutting height setting.

•

If there are more than 5 inches (12.7 cm) of leaves on the

lawn, set the front cutting height 1 or 2 notches higher

than the rear cutting height. This makes it easier to feed

the leaves under the machine housing.

•

Slow down your mowing speed if the machine does not

cut the leaves finely enough.

Table of Contents