Table of Contents
Advertisement
2. Repeat step 1 on page 353 until you have resolved all needed conditions.
Figure 228. Operator Intervention Window
The Operator Intervention window has one check box:
Send interventions to host consoles
The Operator Intervention window has the following push buttons:
Clear all
OK
354
3494 Tape Library Operator Guide
a. Certain conditions (for example, library full, convenience I/O station
full, and out of cleaner cartridges) are cleared automatically after you
resolve the intervention-required condition.
b. Certain conditions require you to open the frame door to resolve.
c. You can highlight more than one condition. Choosing OK clears all
the items you highlighted.
d. You can display the operator interventions in date and time order or
in priority order. Select the appropriate button under Display Order
to change the display.
When you indicate that all outstanding conditions are resolved, the window
closes. Also, you can close the window and resolve some conditions later by
selecting the Cancel push button.
If you select this check box, all operator intervention messages are sent to
all attached hosts. If the hosts are configured to display messages, these
messages are displayed on the host console.
Allows the system administrator to clear all operator interventions that
start with an * (asterisk) from the list and closes the Operator Intervention
window. This requires system administrator authority. These interventions
should be cleared automatically.
Clears the highlighted intervention items from the list. If all the items are
cleared, closes the Operator Intervention window.
Advertisement
Table of Contents
