Action Critical-Event - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

action critical-event

To configure what action is taken on an interface when a critical-event notification is received from the remote

Ethernet OAM peer, use the action critical-event command in Ethernet OAM configuration mode or interface

Ethernet OAM configuration mode. To return to the default, use the no form of this command.

action critical-event {disable| error-disable-interface| log}

no action critical-event {disable| error-disable-interface| log}

Syntax Description

error-disable-interface

Command Default

The default action is to create a syslog entry.

Command Modes

Ethernet OAM configuration (config-eoam)

Interface Ethernet OAM configuration (config-if-eoam)

Command History

Release 3.9.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

ethernet-services

Performs no action on the interface when a critical-event notification is received.

Puts the interface into the error-disable state when a critical-event notification is

(Interface Ethernet OAM configuration only) Creates a syslog entry when a

critical-event notification is received. This action is available only in interface

Ethernet OAM configuration mode to override the OAM profile on a specific

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Modification

This command was introduced.

Release 5.3.x

Show Quick Links

Table of Contents