Pm Optics Report Enable - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

pm optics report enable

To enable Threshold Crossing Alert (TCA) generation on the optics layer, use the pm optics report enable

command in DWDM configuration mode. To disable TCA reporting, use the no form of this command.

pm {15-min| 24-hour} optics report {lbc| opr| opt} {max-tca| min-tca} enable

no pm {15-min| 24-hour} optics report {lbc| opr| opt} {max-tca| min-tca} enable

Syntax Description

Command Default

TCA reporting is not enabled.

Command Modes

DWDM configuration

Command History

Release 3.9.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

To display performance monitoring information for the optics, use the show controller dwdm pm optics

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router

Configures TCA generation for 15-minute intervals.

Configures TCA generation for 24-hour intervals.

Laser bias current.

Optical power on the unidirectional port.

Transmit optical power in dBm.

Indicates that the maximum value of the parameter is compared against the

threshold to determine if a TCA should be generated.

Indicates that the minimum value of the parameter is compared against the

threshold to determine if a TCA should be generated.

Modification

This command was introduced.

Show Quick Links

Table of Contents