Produktinfo Circulating-air mode ................5 Operating the appliance ............6 Additional information on products, accessories, replacement Lighting ....................6 parts and services can be found at www.siemens-home.bsh- Saturation indicator................6 group.com and in the online shop www.siemens-home.bsh- group.com/eshops : Important safety information Read these instructions carefully. Only then...
Page 4
Room air-dependent heat-producing Risk of fire! appliances (e.g. gas, oil, wood or coal- Grease deposits in the grease filter may ■ operated heaters, continuous flow heaters catch fire. or water heaters) obtain combustion air Clean the grease filter at least every from the room in which they are installed 2 months.
Risk of electric shock! Causes of damage A defective appliance may cause electric Caution! ■ shock. Never switch on a defective Risk of damage due to corrosion. Always switch on the appliance. Unplug the appliance from the appliance while cooking to avoid condensation. Condensate can produce corrosion damage.
Operating the appliance Fan run-on These instructions apply to several appliance variants. It is possible that individual features are described which do not With the fan run-on, the appliance continues to run at the level apply to your appliance. that was previously set and switches off automatically after Note: Switch on the extractor hood when you start cooking and 30 minutes.
Cleaning and maintenance Removing metal grease filter Risk of burns! The appliance will become hot during operation, especially Open the filter cover. near the bulbs. Allow the appliance to cool down before Note: Grasp the front corners of the filter cover and pull it cleaning.
Page 8
Fitting the activated charcoal filter (only in In the dishwasher: circulating-air mode) Note: If the metal mesh grease filters are cleaned in the dishwasher, slight discolouration may occur. This has no effect Insert the activated charcoal filter into the extractor hood. on the function of the metal mesh grease filters.
Page 9
Removing the activated charcoal filter (only in Fitting the activated charcoal filter (only in circulating-air mode) circulating-air mode) In order to ensure adequate odour removal, you must replace Take the new activated charcoal filter out of its packaging the activated charcoal filter regularly. and insert it in the air recirculation module.
Trouble shooting Malfunctions often have simple explanations. Please read the LED lights following notes before calling the after-sales service. Defective LED lights must only be replaced by the manufacturer, their customer service department or a licensed Risk of electric shock! technician (electrician).