Table of Contents
Related Manuals for Siemens LB89586AU
Summary of Contents for Siemens LB89586AU
- Page 1 Extractor hood LB89586AU User manual and installation instructions Register your product on My Siemens and discover exclusive ser- vices and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Safety Do not use the appliance: Table of contents ¡ With an external timer. 1.3 Restriction on user group This appliance may be used by children aged USER MANUAL 8 or over and by people who have reduced Safety .............. 2 physical, sensory or mental abilities or inad- Avoiding material damage........ -
Page 3: Safety
Safety en shaft are sucked back into the living space. flames carefully using a lid, fire blanket or something similar. When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. A ventilation appliance in- stalled above the cooker may become dam- aged or catch fire. -
Page 4: Avoiding Material Damage
en Avoiding material damage ▶ Do not use steam- or high-pressure clean- in the interior of the appliance may cause ex- ers to clean the appliance. plosions. ▶ Never use highly caustic alkaline or highly WARNING ‒ Risk of explosion! acidic cleaning agents. In particular, do not Highly caustic alkaline or highly acidic clean- use commercial or industrial cleaning ing agents in conjunction with aluminium parts... -
Page 5: Operating Modes
Operating modes en 4 Operating modes You can use your appliance in air extraction mode or circulating-air mode. 4.1 Air extraction mode The air which is drawn in is cleaned by the grease fil- ters and conveyed to the exterior by a pipe system. The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other... -
Page 6: Familiarising Yourself With Your Appliance
You can find out which accessories are available for (replacement) your appliance in our catalogue, in the online shop or LongLife air recirculation LZ11ITD11 from our after-sales service. www.siemens-home.bsh-group.com Long Life odour filter (re- LZ10ITP00 placement) 7 Basic operation 7.1 Switching on the appliance 7.5 Switching on the fan run-on... -
Page 7: Cleaning And Servicing
Cleaning and servicing en 7.8 Switching on the lighting 7.11 Saturation indicator The lighting can be switched on and off independently The saturation indicator informs you when the grease of the ventilation system. filters need to be cleaned. After cleaning the grease filters, you should reset the Press ... - Page 8 en Cleaning and servicing Open the filter cover by pulling it downwards. ATTENTION! The grease filters may become damaged if they are squeezed. Do not squeeze the grease filters. ▶ Note: When cleaning the grease filter in the dish- washer, light discolouration may occur. This discoloura- tion has no effect on the performance of the metal grease filters.
-
Page 9: Troubleshooting
Troubleshooting en Guide the odour filter around the motor. Guide the odour filter around the motor. Remove the odour filter. Carefully slide the odour filter into the holder. Install the grease filters. Fitting the odour filters Slide the odour filter into the extractor hood. 9 ... -
Page 10: Disposal
en Disposal 9.2 Malfunctions Fault Cause and troubleshooting The appliance is not working. The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. ▶ The circuit breaker is faulty. Check the circuit breaker in the fuse box. ▶... -
Page 11: Installation Instructions
Installation instructions en water heaters) obtain combustion air from the 12.1 Scope of delivery room in which they are installed and dis- After unpacking all parts, check for any damage in charge the exhaust gases into the open transit and completeness of the delivery. through an exhaust gas system (e.g. - Page 12 en Installation instructions ▶ Do not emit the exhaust air into a shaft that The filter cover may swing out. is used to ventilate installation rooms for ▶ Open the filter cover slowly. heat-producing appliances. ▶ Take hold of the filter cover after opening ▶...
- Page 13 Installation instructions en connected to a protective contact socket that has been 12.9 Instructions for the air extraction mode correctly installed. For air extraction mode, a one-way flap should be in- The mains plug for the mains power cable must be ▶ stalled.
- Page 14 en Installation instructions Make the cut-out for the exhaust air pipe either Undo the hinge lock and remove the filter cover. above the fitted unit or behind the fitted unit. Remove the grease filters. To avoid causing damage, do not bend the grease filters.
- Page 15 Installation instructions en Installing the appliance Restore the control panel cabling and the cabling for the lighting. Insert the appliance into the opening in the fitted unit and screw it to the fitted unit . The plug can only be inserted into one position. Ensure that the connector has engaged correctly.
- Page 16 en Installation instructions Connect the pipe to the opening on the fitted unit. Screw the air guide grille to the fitted unit. Seal the joints. Connecting to the power supply Insert the mains plug into the protective contact socket. If a fixed connection is required, follow the instruc- tions in the section → "Instructions for the electrical connection", Page 12.
- Page 20 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001604641* 9001604641 (010330)