Configuring Auto-Lag Globally - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
Related Topics
Configuring LACP Fast Rate Timer: Examples, on page 361
Configuring Auto-LAG Globally
SUMMARY STEPS
1. enable
2. configure terminal
3. [no] port-channel auto
4. end
5. show etherchannel auto
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
[no] port-channel auto
Example:
Switch(config)# port-channel auto
Step 4
end
Example:
Switch(config)# end
Step 5
show etherchannel auto
Example:
Switch# show etherchannel auto
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Enables the auto-LAG feature on a switch globally. Use the no
form of this command to disable the auto-LAG feature on the
switch globally.
By default, the auto-LAG feature is enabled on the
Note
port.
Returns to privileged EXEC mode.
Displays that EtherChannel is created automatically.
How to Configure EtherChannels
355
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
