Dismantling Into Basic Modules - Husqvarna K 760 Workshop Manual
Hide thumbs
Also See for K 760:
- Operator's manual (32 pages) ,
- Price list (48 pages) ,
- Operator's manual (24 pages)
Table of Contents
Advertisement
DISMANTLING INTO BASIC MODULES
1
1
4
6
2
2
5
7
Basic modules
This chapter shows how the machine is
built up of basic modules, for example,
the starter, carburettor, air filter system,
etc.
can easily and effectively dismantle and
assemble the machine in its basic modules.
example, replacing the starter cord, is
described in detail in respective chapters.
Starter
1. Loosen the starter's 4 screws.
2. Remove the starter.
Cutting head
3
1. Loosen the screws to the cutting head.
(Tightening torque when mounting
18–22 lbf·ft/25–30 Nm.)
2. Loosen the tension of the belt with the
adjuster screw.
3. Detach the hose clip.
4. Remove the screws to the cutting head.
Remove the front belt guard by pushing
it forward.
5. Detach the hose at the water valve.
Lift off the belt from the belt pulley and
remove the cutting head.
6. Loosen the rear belt guard's two screws.
6.6–8.1 lbf·ft/9–11 Nm.)
7. Remove the guard.
The purpose is to illustrate how you
Service work on a component level, for
(Tightening torque when mounting
4
6
Hide quick links:
Advertisement
Table of Contents
