Dismantling Into Basic Modules - Husqvarna K 1260 Workshop Manual
Hide thumbs
Also See for K 1260:
- Operator's manual (32 pages) ,
- Price list (48 pages) ,
- Operator's manual (28 pages)
Table of Contents
Advertisement
DISMANTLING INTO BASIC MODULES
1
1
4
6
2
2
5
7
Basic modules
This chapter shows how the machine is
built up of basic modules, for example,
the starter, carburettor, air filter system,
etc.
can easily and effectively dismantle and
assemble the machine in its basic modules.
example, replacing the starter cord, is
described in detail in respective chapters.
Starter
1. Loosen the cover's 4 screws.
2. Remove the starter.
Cutting head
3
1. Loosen the screws to the cutting head.
2. Loosen the tension of the belt with the
adjuster screw. Remove the screws to the
cutting head.
3. Detach the hose clip.
4. Remove the front belt guard by
pushing it forward.
5. Lift off the belt from the belt pulley
and remove the cutting head.
6. Remove the rear belt guard bolts.
7. Lift off the guard.
The purpose is to illustrate how you
Service work on a component level, for
At this stage, the belt can be replaced.
4
6
Hide quick links:
Advertisement
Table of Contents
