Back Panel; Power - Honeywell Dolphin 99EX User Manual
With windows embedded handheld 6.5
Hide thumbs
Also See for Dolphin 99EX:
- User manual (193 pages) ,
- Quick start manual (25 pages) ,
- User manual (198 pages)
Table of Contents
Advertisement
Back Panel
USB Port
Auxiliary Battery Well
The base enables you to charge an additional battery pack independently of the terminal well
in 4.5 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. This feature
ensures that you can always have a fully-charged battery for your terminal. See
Spare Battery in the Auxiliary Battery Well
USB Port
This USB port is USB v2.0 high-speed compliant. Using a USB cable, you can connect the
base to a host device, such as a workstation. USB communication occurs through Microsoft
ActiveSync (v4.5 or higher) or Microsoft Windows Mobile Device Center (WMDC) depending
on the host workstation's operating system. When the terminal is seated in the terminal well, it
is connected to the host device via the base.
Note:
ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host
workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations
running Windows XP. For detailed information on ActiveSync and WMDC visit Microsoft's
Windows Mobile Web site.
RS232 Port
Use the 9-pin, RS232 cable from Honeywell to connect this port to a peripheral device for
RS232 data communication. For more information, see
DC Power Jack
Use the power cable from Honeywell that comes with the base to supply power to this power
jack. For more information, see
12 - 4
Preliminary Draft 1/19/11
Auxiliary Battery Well
RS232 Port
on page
12-6.
Power
section that follows.
DC Power Jack
Serial Connector
on page
Charging a
12-5.
Hide quick links:
Advertisement
Table of Contents
