Configuring Default Route Of The Physical Wan Interface - Cisco RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for RV315W:
- Administration manual (109 pages) ,
- Datasheet (9 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Port Management
Configuring WAN Connections
STEP 8
STEP 9
STEP 10
STEP 11
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
In the Service Binding field, select one of the following service types for the WAN
connection:
•
Management: Only use for management purpose.
•
Internet: Only use for Internet access purpose.
•
Management_Internet: Use for both management and Internet access
purposes.
•
VoIP: Only use for VoIP traffic.
•
IPTV: Only use for IPTV traffic.
•
Other: Use for other purposes.
If you choose Bridge Mode, enter the following information:
•
In the Enable VLAN filed, check the box to enable VLAN if your ISP uses the
VLAN ID to identify the users. If you enable this feature, specify the VLAN ID
and the 802. 1 p priority.
•
In the Bridging Port area, specify the port as the subinterface's downstream
path.
Click OK to save your settings and return to the WAN Interface Settings page.
To edit the settings of a WAN connection, click Edit. To delete a WAN connection
through a WAN subinterface, click Delete.
Configuring Default Route of the Physical WAN Interface
If multiple WAN connections are defined on a physical WAN interface, you must
choose the default route of the physical WAN interface.
To configure the default route of the physical WAN interface:
Click Port Settings > WAN > WAN Interface Settings. The WAN Interface
Settings page opens.
In the Configure WAN Interface's Default Route area, select the default route
interface for each physical WAN interface.
Click OK to save your settings.
4
38
Advertisement
Table of Contents
