Managing System Configuration - Cisco RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for RV315W:
- Administration manual (109 pages) ,
- Datasheet (9 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
System Management
Managing System Configuration
STEP 1
STEP 2
STEP 3
Managing System Configuration
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
To restore the RV315W to the factory default settings through the utility:
Click System Management > Reset To Factory Defaults. The Reset To Factory
Defaults page opens.
Click Reset to Factory Defaults.
This operation reboots the unit and restores the RV315W to the factory default
settings. The settings that you have previously made to the RV315W are lost. Click
OK.
This section describes how to work with the configuration. You can perform the
following tasks to maintain system configuration:
•
Back up the settings currently used on your RV315W.
•
Restore your settings from a saved configuration file.
•
Upload the configuration to an upper-level Network Management System
(NMS).
To manage system configuration:
Click System Management > Configuration Management. The Configuration
Management page opens.
To back up the settings currently used on your RV315W, click Backup
Configuration. Select where to locate the configuration file, and then click OK.
To restore your setting from a saved configuration file, click Browse to locate and
select a saved configuration file, and then click Import. The system will be
rebooted with the loaded configuration file.
To upload the configuration to an upper-level Network Management System
(NMS), you must first configure the TR069 settings on your RV315W (see
Configuring
TR-069), and then click Upload Configuration.
9
89
Advertisement
Table of Contents
