Cisco ASR 9000 Series Configuration Manual page 117
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing BGP
SUMMARY STEPS
1. configure
2. router bgp as-number
3. address-family { ipv4 | ipv6 } unicast
4. Do one of the following:
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 120
Step 3
address-family { ipv4 | ipv6 } unicast
Example:
RP/0/RSP0/CPU0:router(config-bgp)# address-family ipv4 unicast
Step 4
Do one of the following:
• redistribute connected [ metric metric-value ] [ route-policy
route-policy-name ]
• redistribute eigrp process-id [ match { external | internal }]
[ metric metric-value ] [ route-policy route-policy-name ]
OL-30423-03
• redistribute connected [ metric metric-value ] [ route-policy route-policy-name ]
• redistribute eigrp process-id [ match { external | internal }] [ metric metric-value ] [
route-policy route-policy-name ]
• redistribute isis process-id [ level { 1 | 1-inter-area | 2 }] [ metric metric-value ] [ route-policy
route-policy-name ]
• redistribute ospf process-id [ match { external [ 1 | 2 ] | internal | nssa-external [ 1 | 2
]]} [ metric metric-value ] [ route-policy route-policy-name ]
• redistribute ospfv3 process-id [ match { external [ 1 | 2 ] | internal | nssa-external [ 1 |
2 ]]} [ metric metric-value ] [ route-policy route-policy-name ]
• redistribute rip [ metric metric-value ] [ route-policy route-policy-name ]
• redistribute static [ metric metric-value ] [ route-policy route-policy-name ]
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
Redistributing Prefixes into Multiprotocol BGP
Purpose
Specifies the autonomous system number
and enters the BGP configuration mode,
allowing you to configure the BGP routing
process.
Specifies either the IPv4 or IPv6 address
family and enters address family
configuration submode.
To see a list of all the possible keywords and
arguments for this command, use the CLI
help (?).
Causes routes from the specified instance to
be redistributed into BGP.
89
Advertisement
Table of Contents
