Ip Lisp Shortest-Eid-Prefix-Length - Cisco Nexus 7000 Series Command Reference Manual
Nx-os lisp command reference
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
ip lisp shortest-eid-prefix-length
To configure the shortest IPv4 endpoint identifier (EID)-prefix mask-length that is acceptable to an
ingress tunnel router (ITR) or Proxy ITR (PITR) in a received Map-Reply message or to an ETR in the
mapping-data record of a received Map-Request, use the ip lisp shortest-eid-prefix-length command.
To return to the default configuration, use the no form of this command.
Syntax Description
IPv4-EID-prefix-length
a/6
Defaults
Global configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History
Release
5.0(1.13)
When an ITR or PITR receives a Map-Reply message, the mapping data it contains includes the EID
Usage Guidelines
mask-length for the returned EID prefix. By default, the shortest EID prefix mask length accepted by an
ITR or PITR for an IPv4 EID prefix is a /16. You can use the ip lisp shortest-eid-prefix-length
command to change this default. For example, it may be necessary for a PITR to accept a shorter
(coarser) prefix if one exists.
When an ETR receives a Map-Request message, it might contain a mapping data record that the ETR
can cache and possible use to forward traffic depending on the configuration of the ip lisp etr
accept-map-request-mapping command. Use the ip lisp shortest-eid-prefix-length command to
change the shortest prefix length accepted by the ETR. In this case, the check for the shortest EID-prefix
mask length is done prior to the verifying Map-Request, if also configured. That is, if the EID-prefix
mask length is less than the configured value, the verifying Map-Request is not sent and the mapping
data is not accepted.
This command does not require a license.
OL-25345-01
ip lisp shortest-eid-prefix-length IPv4-EID-prefix-length
no ip lisp shortest-eid-prefix-length IPv4-EID-prefix-length
Shortest IPv4 EID prefix-length accepted from a Map-Reply or data record
in a Map-Request. The range is from 0 to 32.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
ip lisp shortest-eid-prefix-length
LSP-69
Advertisement
Table of Contents
