Table of Contents
Advertisement
Tips
• When the output resolution is SD, menus will not be
displayed.
• When the output resolution is SD or 1920 × 1080, the
idle status, recording status, playback status, and
multiple auto live images will not be displayed.
• If [Menu Display (HDMI)] is set to [Use], input images
from SDI output connectors A to D will not be
displayed and black screens will be output instead.
• When [Ch1/Ch2 Rec Mode] is set to [Ch1 2K Rec] in
the [Recording] tab, this item will be grayed out.
To configure advanced image list settings
Specify the selection state of recorded data when you
perform copy or print operations in the [Image List]
screen.
1
Select [Advanced] for [Image List Display], and
press the ENTER button.
The [Advanced] settings screen appears.
2
Configure each setting, select [Apply] and press the
ENTER button.
[Save to]
Select the selection state of recorded data when [Save
to] is selected in the operation box.
You can select from [Deselect All], [Select All],
[Video], and [Still].
The default setting is [Deselect All].
[Print]
Select the selection state of recorded data when
[Print] is selected in the operation box.
You can select from [Deselect All] and [Still].
The default setting is [Deselect All].
[General 2] Tab
Configure initial system settings.
[Recovery]
Select whether to return to the action that was being
performed when a recovery operation was executed.
The default setting is [Use].
Recovery of recorded data is the only action performed
when [Not Used] is selected.
[Automatic Pause]
Select whether to automatically pause recording when
there is no input signal.
The default setting is [Not Used].
If you select [Use], recording will pause if there is no
input signal for 10 minutes.
[Mic Plug-In Power]
Select the voltage to use when supplying power to the
microphone from the unit.
You can select from [2.5V], [3.2V], and [4.2V].
This item is available when [Mic Plug-In Power] is set to
[Use] in the [User Settings] screen – [Select Input] tab.
The default setting is [2.5V].
[LCD Backlight Adjust]
Select the brightness of the front panel display.
You can select from [25%], [50%], [75%], and [100%].
The default setting is [75%].
[Facility] Tab
Configure initial settings for the facility.
[Facility Name]
Enter up to 32 characters for the facility name.
Use only alphanumeric characters, underscores (_),
hyphens (-), and spaces.
[Display Logo]
Select whether to display a logo in the [MENU] screen.
The default setting is [Not Used].
If you want to set [Display Logo] to [Use], be sure to
import the logo.
For details on importing, see "To import a logo"
(page 66).
To import a logo
Import the logo file you want to display.
1
Copy the logo file onto a USB memory device, and
insert the device into a USB port 1 on the front panel
of the unit.
2
Select [Import], and press the ENTER button.
3
Press the ENTER button when the message that
requests media to be inserted appears.
When import of the logo file is complete, a
notification message will appear.
To prepare a logo file
To display a logo, prepare a logo file that can be imported
to the unit and copy it onto a USB memory device
beforehand.
1
Prepare the logo file.
The logo file must meet the following conditions.
File format: 24-bit bitmap
File name: MenuLogo.bmp
66
Advertisement
Table of Contents
