hit counter script

Solid Cooking Fats; Timer; After Frying - Silvercrest SKF 2300 A16 Operating Instructions Manual

Cool-zone deep fat fryer
Table of Contents

Advertisement

Note:
The frying process can be overseen through the
viewing window 1 in the appliance lid.

Solid Cooking Fats

To avoid a spraying of the fat and that the appliance
becomes too hot, please take the following precau-
tions when using solid frying fat:
• When replacing old fat with fresh, first melt the
fresh blocks of fat slowly, under low heat, in a
separate pan. Then carefully pour the molten fat
into the deep fryer. When this has been done,
insert the power plug into a socket and switch
the deep fryer on.
• After use, store the deep fryer with the solidified
fat at room temperatures.
If the fat is too cold, it can splatter on remelting! To
avoid this, use a wooden or plastic implement to
make some holes in the re-solidified fat. Ensure that
the heating element is not damaged when doing
this.
• To melt the fat, switch the appliance on with the
on/off switch 0 and set the temperature dial 8
at 130˚C. The lamp integrated into the on/off
switch 0 comes on.
• Wait until all the fat has melted. Thereby, the
green indicator lamp 9 can, on occasion, go out
and light up again. First set the required frying
temperature when all of the fat has melted.

Timer

You can programme in a countdown of up to 60 mi-
nutes with the timer q:
• Press the button "
• Press the buttons "+" and "-" to set the desired
time in minutes.
• Press on the button "
of the time. The programmed time will blink twice
to indicate that the countdown of the time has
begun.
Signal tones sound on completion of the countdown.
The short-period timer q switches itself off automati-
cally.
Note:
On expiry of the countdown the heating element 5
is NOT switched off! Therefore pay heed to the signal
tone from the short-period timer q, so as to avoid
spoiling the food being fried.
Note:
When the battery is discharged, exchange it. Always
use a replacement battery of the same type. Pay
heed to the correct polarity when inserting it.

After Frying

• When the food is ready, pull the handle upwards
until the handle locking button w engages.
• Leave the frying basket 3 in this position to drip
off.
• Press the On/Off switch 0. The deep fryer is
now switched off. Remove the power plug from
the wall socket.
• When the food has dripped off, open the ap-
pliance lid by pressing the lid release button 6.
- 6 -
" on the timer to switch it on.
" to start the countdown

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Skf 2300 a1

Table of Contents