Table of Contents
Advertisement
To restore the partitions to their original condition, please do the following:
Primary Partition
1. To boot from the Recovery Windows 98 CD proceed as follows: When the
message
Press <F2> to enter Setup
appears on the screen press the ESC key. After initialization a boot menu to
select the boot options is displayed.
2. Select "4. ATAPI CD-ROM Drive".
3. When "Microsoft Windows 98 Startup Menu" is displayed, select
"2. Boot for FDISK, FORMAT or Windows 98 Setup".
4. Start the Microsoft Windows 98 hard disk configuration program with
"A:\>FDisk" (A is the CD-ROM drive).
Select the dialog box for enable large disk support for installing
– a FAT16 partition "activate support (Y/N)...? [ N ] " for No
– a FAT32 partition "activate support (Y/N)...? [ Y] " for Yes.
5. Create a primary DOS-Partition of 2045 MB for a FAT 16 file system or with
4090 MB for a FAT 32 file system. Answer the question "Do you wish to use the
maximum available size..." with
– for a 2045 MB FAT16 partition [Y] for Yes,
– for a FAT32 partition [ N] " for No and the partition size 4090 MB.
6. In order to continue with the next step "Create a Save to Disk Partition" the
primary partition needs to be formatted.
Use the Windows 98 CD to boot as described in steps 1 to 3 above and then
format drive C: with the program "Format".
Type: "A:\>Format C:".
Creating an Extended Partition
In order to create an extended partition, you have to first boot from the Windows
98 CD as described in steps 1 to 4 above.
Using "A:\>FDisk" start the Microsoft Windows 98 hard disk configuration program.
Select the dialog box for large disk support. "Do you wish to enable large disk
suport (Y/N)...? [Y] for Yes.
Create an extended DOS partition for the rest of the disk space.
Operating Instructions PG 740 PIII
A5E00063150-03
Siemens Drives & PLCs
Reinstallation of the Software
6-3
- Quick Links:
- Overview
Hide quick links:
Advertisement
Table of Contents
