S0 Line Operation Mode - Siemens HiPath 1100 Programming Manual
Analog mf telephones
Hide thumbs
Also See for HiPath 1100:
- Service manual (389 pages) ,
- Programming manual (241 pages) ,
- User manual (137 pages)
Table of Contents
Advertisement
Step by Step
1
,
,
0 1
0 2
0 3
1
S
Line Operation Mode
0
This setting specifies the type of connection between
the S
0
nection can be Point-to-Point or Point-to-Multipoint or S
Bus.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
9 0
or
Enter the S
1 1
Enter the physical slot for the S
0 0
external line only - PP or PMP)
0 0
0 0
ule, enter Slot 11 and Port 00 ... 04).
...
3
Select the type of connection for the digital line:
= Point-to-Point (PP - default for the first port)
1
2
= Point-to-Multipoint (PMP)
= Bus S
3
Enter the next physical slot for the S
or
Press this key.
#
Initial state for Programming Mode.
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
Module digital lines and the local carrier. The con-
Module slot on the system
0
...
0 1
= On the HiPath 1120 (Port 00 slot is for
...
= For HiPath 1150;
0 4
...
= For HiPath 1190 (for the second mod-
0 4
line call (default for all other ports)
0
On the HiPath 1120, the S
for digital line only, PP or PMP . It cannot be pro-
grammed as an S
0
With other systems, the first physical port slot
may also be configured as an S
Programming a Digital Trunk
1
.
module:
0
0 module.
module's first port is
0
bus.
bus.
0
0
139
- Quick Links:
- Programming Mode
Hide quick links:
Advertisement
Table of Contents
