Table of Contents
Advertisement
Security Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level
Change User Password
Password Check
Password Lock Mode
Removable Device Boot
Flash Write
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
Limited allows changes only to selected fields, such as Date and Time.
Full Access allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on
top of the screen shows the default Not Installed. After you set a password, this
item shows Installed.
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message "Password Installed" appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user password.
Flash Write [Enabled]
Allows you to enable or disable the Flash Write function. When set to Disabled the
BIOS Flash Memory is protected. Configuration options: [Disabled] [Enabled]
ASUS TS300-E4
BIOS SETUP UTILITY
Security
: Installed
: Not Installed
[Limited]
[Setup]
[Disabled]
[Enabled]
[Enabled]
<Enter> to change
password.
<Enter> again to
disable password.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
5-37
Advertisement
Table of Contents
