Table of Contents
Advertisement
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID array.
•
The disk is not large enough to mirror existing data on the primary drive.
•
The disk has been selected as the Hot Spare for the RAID array.
•
The disk is already part of another array.
6.
Repeat step 5 to add the other disks to the volume.
7.
When done, press <C> to create the array, then select Save changes then
exit this menu.
9.
The utility creates the array.
ASUS TS300-E4
6-51
Advertisement
Table of Contents
