Advertisement
Quick Links
—
Quick Start Guide
ARC600 Wireless Controller
1
2
3
4
5
if any of the panels is removed. Voltage inside the device is extremely dangerous and
may cause death or severe injury.
1
2
4
5
SIM card tray connector
Antenna connector SMA (female)
X2.1 connector for power supply
Power switch (bottom)
Ethernet connector and serial ports (bottom)
The device uses 230 V AC mains voltage. Carefully read through all the documentation
of this product and follow the local safety regulations. The device must not be operated
3
Pin 1 = L (Phase), 90...264 VAC
Pin 2 = N (Neutral)
Pin 4 = PE (Protective Earth)
Pin 6 = DC voltage in, 20...30 VDC
Pin 7 = GND
Advertisement
Related Manuals for ABB ARC600
Summary of Contents for ABB ARC600
- Page 1 — Quick Start Guide ARC600 Wireless Controller SIM card tray connector Antenna connector SMA (female) X2.1 connector for power supply Pin 1 = L (Phase), 90...264 VAC Pin 2 = N (Neutral) Pin 4 = PE (Protective Earth) Pin 6 = DC voltage in, 20...30 VDC...
- Page 2 If your SIM card requires a PIN code, do not install it before you have configured the Arctic device PIN code settings. — — Figure 1. Browser https example Figure 2. Welcome page in the ARC600 Web user interface...
- Page 3 INTERNET or operatorname.com). As this setting depends on your mobile operator, ensure the APN settings directly from the operator. Complete customer documentation is available in the product pages that can be accessed through abb.com/mediumvoltage — Figure 3. Mobile WAN settings...
- Page 4 With regard to purchase orders, illustrations contained therein. Any reproduction, disclosure to third the agreed particulars shall prevail. ABB does not accept any responsibility parties or utilization of its contents – in whole or in parts – is forbidden whatsoever for potential errors or possible lack of information in this without prior written consent of ABB.